GEX THERMOGLETT
GEX Thermoglett is an optional middle layer in the GEX order of layers, which, when used together with other GEX products, enhances their thermal barrier capacity. In addition to historical monuments, residential, public, and industrial buildings (halls), GEX Thermoglett can also be used on natural stone, concrete surfaces, brick
walls, and gypsum and cement plasters of buildings for livestock and plant production. The application of a 3-8 mm layer can result in significant heating and cooling cost savings.
It provides extremely good adhesion on various substrates, promotes the natural ventilation of the buildings, and practically eliminates thermal bridges, which, as a consequence, decreases the possibility of mould formation. It forms a breathable and moisture permeable, water-repellent, uniform, decorative, aesthetic coating.
No hazardous waste is generated during the use of the product.
Ready-mix
Reduces mould growth
Improves surface strength
Reduces absorption
Non-flammable
Excellent adhesion
TECHNICAL SPECIFICATIONS GEX THERMOGLETT
Technical data
- Recommended layer thickness: 1-8 mm
- Material requirement: 1.2-1.3 litres/m2/mm (the exact material requirement can be determined by test application)
- With airless equipment, a coating with a thickness of 300-1500 μ can be applied with one spray fan.
- The drying time of the product at +23 °C is 2 hours (the next layer can be applied after two hours).
- Total setting time: 24 hours.
- Water-based, ready-mix solvent-free thin-layer thermal protection coating.
Important information
- The material must not be exposed to frost during the setting time.
- The product must not be used at temperatures below 5°C and above 35°C, including wall and air temperatures.
- The surface must be protected from rain during the drying time of the coating.
- Ensure adequate ventilation in case of indoor use.
- Our product ensures excellent adhesion and a relatively fast drying time. Nevertheless, we do not recommend applying layers thicker than 1500 μ (1.5 mm), because it has an adverse effect on the order of layers.
Other GEX products
Our mission
The mission of the GEX product range is to contribute to a more sustainable future with innovative, environmentally friendly and energy efficient solutions, while providing our partners with the results of cutting-edge technological developments.
With the development of our special family of heat-reflective ceramic coatings, we have created products that not only offer solutions for thermal protection, but also open up new perspectives in energy efficiency and sustainability for the construction industry and many other industrial sectors.