GEX PRIMER
GEX Primer is a ready-to-use, alkali-resistant deep primer with water-dispersion binder material for surface preparation, to be applied as the first in the order of layers.
The GEX Primer deep primer is suitable for reinforcing slightly crumbling but still load-bearing plasters and chalky surfaces coated with dispersion paint, for priming before installing plasterboard construction elements, and for substrate-reinforcing preparations for lime-cement and gypsum-based plasters, both indoors and outdoors.
Ready-mix
Reduces absorption
Improves surface strength
Does not form a film layer
Technical specifications GEX PRIMER
Technical data
- Dilution: 1:5, Mixing: 1 minute, drying time: 24 hours.
- Material requirement: for substrates with low moisture absorption, approx. 0.1 litres/m2; for highly absorbent substrates, approx. 0.25 litres/m2 (the exact material requirement can be determined by test application)
- Application specifications: material, air, and substrate temperature above +5°C, in a draft-free, shady location.
Important information
- The material must not be exposed to frost during the setting time.
- The surface must be protected from rain during the drying time of the primer.
- Ensure adequate ventilation in case of indoor use.
Other GEX products
Our mission
The mission of the GEX product range is to contribute to a more sustainable future with innovative, environmentally friendly and energy efficient solutions, while providing our partners with the results of cutting-edge technological developments.
With the development of our special family of heat-reflective ceramic coatings, we have created products that not only offer solutions for thermal protection, but also open up new perspectives in energy efficiency and sustainability for the construction industry and many other industrial sectors.